REQUIREMENTS: THE GARMENTS SHALL BE CUSTOM MADE TO MEASURE ACCORDING TO INDIVIDUAL MEASURMENTS AND FITTINGS. FIRST QUALITY 55% DACRON POLYESTER AND 45% WORSTED WOOL GABARDINE FINISH AS DETAILED IN SPECIFICATIONS OR APPROVED EQUAL. ALL MATERIALS NECESSARY TO PRODUCE THE BLOUSE MUST BE FIRST QUALITY AND THE GARMENTS SHALL BE CLEAN, FINISHED AND PRESSED. FABRIC SPECIFICATIONS WEAVE – ELASTIQUE WEIGHT – 16 1/2 OUNCES PER LINEAR YARD FIBER CONTENT – 55% DACRON POLYESTER 45% WOOL WORSTED PLY OF YARN – 2-PLY WARP AND FILLING COLOR- BROWN AS OBTAINED BY THE YARN DYE PROCESS REFERENCE: BURLINGTON MILLS #645-983 OR APPROVED EQUAL BLOUSE FABRICATION: STYLE FOUR BUTTON SINGLE BREASTED, BUTTON STAND, NOTCH LAPEL, FORM FITTING, CUT SNUG AT WAIST, FLARE IN SKIRT. (SAM BROWNE BELT TO BE WORN) DOUBLE BI-SWING BACK AND CENTER VENT OMITTED. NOTCH LAPEL SHALL BE 3 3/8” LONG FROM BREAK AND 1 3/8” TOP COLLAR. COLLAR SHALL BE ROLLED TO FIRST BUTTON, AND SHALL HAVE UNDERCOLLAR 100% POLYESTER NEDDLE PUNCH FELT, COLOR TO MATCH OUTER SHELL CLOTH. UNDERCOLLAR SHALL BE BASTED AND FELLED AT BOTTOM. POCKETS BLOUSE SHALL HAVE TWO OUTSIDE BREAST POCKETS WITH PLEATS AND FLAPS WHICH BUTTON DOWN. THE CORNERS OF THE POCKETS SHALL BE SLIGHTLY ROUNDED. THE PLEAT IN EACH POCKET SHALL BE 1 ½” WIDE. THE BLOUSE SHALL ALSO HAVE TWO LOWER BESOM POCKETS WITH FLAPS WHICH WILL BUTTON DOWN WITH 24 LIGNE BUTTONS. UNIFORMITY AND SPACING SHALL BE MAINTAINED AT THE BOTTOM OF WAIST. THE BLOUSE SHALL ALSO BE CONSTRUCTED WITH TWO INSIDE BREAST POCKETS. THE POCKETS SHALL BE 5 ¾” WIDE BY 6” DEEP. THE POCKET OPENING SHALL BE NEATLY PIPED. DIMENSIONS FOR BREAST POCKETS AND LOWER POCKETS SHALL BE SCALED IN ACCORDANCE WITH GARMENT SIZE AND LENGTH. ALL POCKET FLAPS ARE TO BE SCALLOP STYLE.
