All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: The improvements consist of furnishing all labor, material, and equipment to replace or repair cantilever and overhead sign structures. Follow other incidental construction in accordance with the location, notes and details shown on the plans, and as directed by the Engineer. . Repair Type A - Grind And Reweld Cracks . Repair Type B - Replace/Tighten Missing/Deteriorated/Loose U-Bolt Connections . Repair Type C - Chord To Pole Connection Retrofit . Repair Type D - Replace, Shim Or Tighten Missing/Deteriorated/Loose Chord, Splice/Truss/End Cap Connection Bolts/Nuts . Repair Type E - Replace/Tighten Missing/Deteriorated/Loose Sign Attachment Nuts/Clamps/Clips, Including Bolts On Vertical Attachment Members . Repair Type F - Clean, Paint And Galvanize Anchor Bolts/Adaptor Rings . Repair Type G - Repair/Regrade Erosion Or Clear Vegetation Around Foundations . Repair Type H - Repair Deteriorated Concrete And Seal Cracks At Foundation . Repair Type I - Tighten Anchor Bolt Nuts, Leveling Nuts, Adaptor Ring Bolts And Burr Threads After Tightening
