Specifications include, but are not limited to: Painting, cleaning and Repairs to occur once during the contract period to each Elevated Storage Tank and WTP Facility. Thoroughly clean the exterior surfaces of the Elevated Storage Tanks, WTP Facilities, pedestal and appurtenant structures by low-pressure water cleaning (less than or equal to 5,000 psi) to remove all deposits from the exterior of the tank or facility once during the ten (10) year contract. Thoroughly inspect the exterior coating of the Elevated Storage TAnks, WTP Facilities and pedestal and appurtenant structures annually. Inspect for any corrosion, deterioration or fatigue of the steel, pitting etc. annually. Perform an adhesion test on the exterior coating in an adequate number of locations to determine quality of the entire system and measure thickness using a non-destructive means twice during this ten (10) year contract. Provide in the inspection report the details of the testing and measurements and an anticipated schedule for re-painting.