A. Scope: 1. Interior Joints: Do not seal interior joints unless specifically indicated to be sealed. Interior joints to be sealed include, but are not limited to, the following items. a. Joints between door, window, and other frames and adjacent construction. b. Other joints indicated below. 2. Do not seal the following types of joints. a. Joints indicated to be treated with manufactured expansion joint cover or some other type of sealing device. b. Joints where sealant is specified to be provided by manufacturer of product to be sealed. c. Joints where installation of sealant is specified in another section. d. Joints between suspended panel ceilings/grid and walls. B. Interior Joints: Use non-sag polyurethane sealant, unless otherwise indicated. 1. Wall and Ceiling Joints in Non-Wet Areas: Acrylic emulsion latex sealant. 2. Wall and Ceiling Joints in Wet Areas: Non-sag polyurethane sealant for continuous liquid immersion. 3. Floor Joints in Wet Areas: Non-sag polyurethane "non-traffic-grade" sealant suitable for continuous liquid immersion. 4. Joints between Fixtures in Wet Areas and Floors, Walls, and Ceilings: Mildew-resistant silicone sealant; white...
