Specifications include, but are not limited to: It is the intent and purpose of these specifications to describe a New Aluminum Dump Truck Body complete with an underbody hoist and complete hydraulic system ground speed control, snowplow frame, snowplow, and spreader. These components shall be mounted by the Vendor on a New 37,500 GVW cab/chassis supplied here in this contract. To discuss system, contact Berley Mears, Public Works Director, at (302) 629-8307. 1.1 Vehicle must conform to all Federal and Delaware Motor Vehicle Laws. In addition the unit shall as a minimum, comply with all applicable Federal Safety Standards, including, but not limited to the provisions of D.O.T. FMCSA regulation part 393 and Subpart O, Paragraph 1926.601, O.S.H.A. Safety and Health Regulations for Construction. All component installers shall also conform to the latest recommendations, procedures, and regulations of the following: ASME, ASTM, API, AWS, FPS, ICC, ISO, JIC, MSS, NFPA, NEMA, NTEA, SAE, TIMA, and USAISI. 1.2 Body installer shall test the hydraulic capacity for all hydraulic circuits. This data shall be documented, using the chassis VIN. This data should be given to the City of Seaford no later than upon delivery of the unit to the City. The data shall contain at a minimum, component manufacturer’s minimums, maximums, and actual readings on these components mounted on the unit. 1.3 The vendor shall provide a list of common consumable parts to include at a minimum, OEM part numbers for all the filters, belts, hoses, brakes, and wheel seals.
