Specifications include, but are not limited to: 1. Interior Stair Repair – Division 6- a) Repair four step stair damaged as a result of termites. b) Located at main living area to garage level c) Remove existing treads (4) and risers (5) d) Inspect Stair Stringers for any signs of damage (If replacement is needed it will be dealt with in change order). e) Replace tread and riser with oak treads and risers f) Homeowner to select stain/paint for new installations. g) Touch-up/repair any damage resulting from stair demo h) Re-install step to floor transitions 2. Exterior Concrete Walk Repair- Division 3 A. Install concrete wall in location where prior walk existed a) Located at “A” façade entry Approximately 25’ x3”. b) Remove section of asphalt to area parallel with right side of garage door, sawcut as needed. c) Form, reinforce and pour new 4” thick concrete sidewalk d) Use existing elevations to benchmark new work, new sidewalk shall pitch away from home. e) Add gravel subbase as needed and compact with vibratory plate compactor f) Use minimum 3,000# concrete mix g) Reinforce with welded wire mesh (typical) h) Set control joints no more than 4’ o.c. (typical) i) Set expansion joints no more than 12’ o.c. (typical) j) Provide broom finish (typical)