Specifications include, but are not limited to: 1. DESCRIPTION OF GOODS AND SERVICES: a. The Contractor shall provide the rental of equipment to the Client Agency. b. The Contractor shall provide operator(s), tools, and all labor necessary for the complete performance of the particular service required by the Client Agency and as more particularly described in Exhibit B hereto. The Contractor furnishing the service has complete responsibility for the equipment and labor being used and will furnish all fuel, maintenance and repair for that equipment. 2. Forestry Prime Mover - Operated by Contractor The Contractor shall provide a steel-tracked prime mover with a minimum of two hundred (200) horsepower and a minimum hydraulic pump capacity of eighty gallons per minute (80 gpm). Comparable equipment is the FECON FTX200. a. Stump Grinder Attachment The prime mover must be capable of operating a stump grinder attachment with a working depth of forty inches (40”) and telescoping ability of twenty-four inches (24”). Comparable attachment is the FECON SH400 stump grinder. b. Auger-Type Grinder Attachment The prime mover must be capable of operating an auger-type grinder for removing stumps eight inches (8”) to twenty-eight inches (28”) in diameter and twenty inches (20”) in depth in a single pass. Comparable attachment is the Stumpex auger-type grinder. c. Forestry Mulcher Attachment The prime mover must be capable of operating a hydraulic forestry mulcher attachment for grinding trees and wood debris in off-road areas. The attachment shall be an FGT design, capable of mixing wood material into the top layer of the dirt if required. Comparable attachment is the Bull Hog FGT in the applicable size and capacity of the prime mover. 3. Rubber Tire Material Handler with Forestry Mower, Crawler Material Handler with Grapple Saw, Crawler Material Handler with Forestry Mower, Chip Trailer / Tractor, Class B Straight Truck, & Class A Tractor / Trailer with Loader – Operated By Contractor The Contractor shall provide and operate the following: Rubber tire material handler with a grapple saw, crawler material handler with a grapple saw, rubber tired whole tree chipper for the cutting and removal of trees along roadsides, chip trailer/ tractor for hauling and disposing of wood chips, Class B straight truck for loading, hauling, and disposing of wood, and Class A tractor and trailer with grapple loader for loading, hauling, and disposing of wood. This operation may require tree cutting and chipping with the distribution of chips along the roadside or cutting, chipping and removal of chips. The Client Agency shall furnish all traffic control, which will include necessary signage, barricades, flaggers and safety vehicles to protect the operation and the motoring public in accordance with the established signing patterns.