1. Furnish and install all wire and cable. 2. Furnish any additional items, not specifically mentioned herein, to meet system requirements as specified, without claim for additional payment. Such items may include hardware, transformers, line/distribution amplifiers, and other devices for proper installation, interface, isolation or gain structure. 3. Programming and documenting of all software-controlled devices. Provide DSP and control system programming prior to final testing, if requested by the Consultant. 4. Refer to Submittals section of this specification for all submittal requirements. 5. Provide frequency scanning and coordination for all AV system wireless transmitters and receivers. Account for local frequencies used by others within the surrounding area. 6. Setup and adjustment of signal processing, system tests and adjustments, written report, demonstration for approval, participation in acceptance tests and final adjustments where required. 7. Submission of shop drawings prior to fabrication. 8. Verification of dimensions and conditions at the job site. 9. Installation in accordance with these specifications, manufacturer’s recommendations, and all applicable code requirements. 10. Setup and adjustment of signal processing, system tests and adjustments, written report, demonstration for approval, participation in acceptance tests, and final adjustments as required.
