Specifications include, but are not limited to: Remove and repave six islands (3500 sq. ft. total). Asphalt curbing, dirt, and grass will be removed offsite. Areas will be prepped for paving and new Class II mix hot asphalt will be paved in place, flush with existing and adjacent grades. Approximately 10 new parking spaces will be added and painted using premium hydrophast pavement traffic marking paint. Existing catch basins will need to be altered to ensure necessary grade for drainage. Six light poles will be removed and re-installed on pre-cast concrete bases. Holes will be excavated and concrete bases will be placed on 6" processed stone. Bases will be set and backfilled. Light poles will be rewired and installed on new bases. All asphalt cracks will be cleaned to remove dirt and vegetation. Cracks will be injected with commercial grade rubberized crack sealant; heated and applied at 375° then dusted with a mineral aggregate to promote proper adhesion and prevent tracking. All materials must meet Federal Spec SS-S-164.