Specifications include, but are not limited to: Previous project relevant work history must be submitted demonstrating the range of work listed below. Limiting it to a small selection that does not show the desired diversification required can affect a Company’s prequalification into the program. The Electrical Contractor shall have the ability and experience to self-perform: General electrical work Demolition, waste removal, disposal and waste recycling of electrical equipment. Abatement and disposal of hazardous materials of electrical equipment. Trade Coordination: Masonry, carpentry, mechanical, plumbing, etc. Installation of wiring and controls associated with: o Mechanical/HVAC equipment. o Fire alarm/fire protection equipment. o Data and communications. Installation and maintenance of <600V switchgear, up to 5000A capacity. Installation and maintenance of <600V Panelboards, up to 2000A capacity. Installation, maintenance, servicing, and testing of <600V circuit breakers. Installation, maintenance, servicing <600V disconnect switches. Installation, maintenance, servicing lighting & lighting controls systems of both normal and emergency types. Installation, maintenance, servicing central inverter systems and associated batteries Capacity to provide thermography services on energized gear, by sub-contractor acceptable. Installation of dry-core <600V Primary/Secondary transformers. Installation, verification, repair, and testing of grounding electrode systems. Installation of generating equipment & associated transfer equipment for legally required emergency/standby systems. Installation, maintenance, servicing dry-core Unit-Substation equipment, <13.8kV Pri/ <600V sec; primarily secondary side and downstream.