Specifications include, but are not limited to: The proposed work associated with the retiming of traffic signals shall include but not be limited to the following items: 1. Provide traffic counts at each leg / phase of each intersection as necessary to perform a timing analysis of each City owned traffic signal. 2. Perform field inventory of existing traffic signal equipment (control box, pedestrian equipment, span poles, detectors, etc.). 3. Evaluate and report the condition of existing traffic signal equipment (control box, pedestrian equipment, span poles, detectors, wiring, controller components, monitors etc.) 4. Recommendation of the replacement of traffic signal equipment in poor condition and associated cost estimate for the replacement. Please note that the City has been replacing controllers with Econolite controllers. 5. Training to City personnel to provide instruction to implement proposed retiming of controller. 6. Preparation of required DOT documentation of traffic signal timing revisions. Access to City owned traffic control equipment on state roads shall be coordinated with the DOT