Specifications include, but are not limited to: A. The work specified herein shall be the abatement of asbestos containing materials by persons who are knowledgeable, qualified, and trained in the removal, treatment, handling, and disposal of asbestos containing material, and the subsequent cleaning of the affected environment. The Contractor shall have a Competent Person in control on the job site at all times during asbestos abatement work. This person must comply with applicable Federal, State and Local regulations which mandate work practices, and be capable of performing the work of this contract. 1. Work Area 1 - As shown on Roof Sketch Remove ACM in the form of: Roofing material. A regulated area(s) shall be established at the perimeter of the work area(s), and access shall be controlled by the Contractor. Because the structure is a “historical building”, every effort should be made to keep the walls intact. After the roof has been removed, the Contractor shall enter the building, using extreme caution, and pick up any roofing material that may have fell into the interior. (Refer to the Demolition Specification for other materials that need to be disposed of.)