Specifications include, but are not limited to: a)Remove any and all spills, standing water, or moisture by using a wet /dry vacuum or dry mop. The Contractor shall then sweep the floor utilizing a properly treated dust mop to remove dirt, dust trash, particles and other debris, ensuring that no oily film exists after completion. b)Inspect the flooring to ensure that there are no loose or raised areas. If such areas are found, the Contractor shall immediately notify the Client Agency Designee. c)Remove all scuff marks, scars, streaks, spills, stains, gum, tar and other foreign substance. d)Use cleaning solutions appropriate for the type of floor surface and mix all cleaning solutions according to the manufacturer’s directions; and e)Take all necessary precautions, including but not limited to the display of “wet floor” signs, to advise Facility users of wet or slippery floors. Upon completion of the cleaning operation, the Contractor shall ensure that no area is more slippery than another and conversely that no area has more drag than another.