Specifications include, but are not limited to: 1. Provide and install replacement windows as specifiedbelow. 2. Replacement windows shall be as specified regarding style, operation and features. 3. Window frames shall be nominal 0.070 inch (1.8mm) thick polyvinyl chloride (PVC) with miter cut and fusion welded corners. Contoured sash design shall be a nominal 0.070 inch (1.7mm) thickness with fusion welded corners. Color: Brown. 4. Glazing: Low E, 5/8 inch (22mm) nominal thickness, insulated glass units are silicone glazed with an exterior glazing bead. 5. Weather Stripping: In compliance with AAMA701.2. 6. Screens: Extruded aluminum frame and 18 x 16 charcoal finished fiberglass mesh screening. 7. Grids: Internal flat grids between glass 6/6 design. 1. Remove existing draperies and reinstall upon window installation as required. 2. Provide and install windows in accordance with manufacturer's installation instructions. 3. Install windows plumb, level and square so as to operate freely and latch securely. 4. Install spun fiberglass insulation within window header and under sill prior to installing window. Insulate between jambs and replacement window using low expansion foam insulation. 5. Install ¾" quarter round interior stops and fasten with appropriately sized finish nails. Set heads below surface and fill with wood filler.Caulk around window. Remove and recycle to greatest extent possible existing front storm doors, frames and related materials. 2. Install 3'-0" x 6' -8" Larson brand, Savana Brown mid view wood core storm door with retractable screen and polished brass handle or approved equal. 3. Install storm door in accordance to manufacturers printed installation instructions. 4. Install new door plumb, level and square, so as to open freely and latch securely 5. Match existing swing.