Specifications include, but are not limited to: Drives and Parking Areas 1. Clear main entrance driveway from Pleasant Street to Flanders Street. 2. Clear center island driveway along with single parking lane. 3. Clear connector driveway and the four (4) double semi-circular parking areas running from main driveway to connector. 4. Clear south entrance driveway to the kitchen loading area and the driveway to the old Vocational Agriculture Center. 5. Clear south parking area and Technical Education driveway and parking area. 6. Clear new Agricultural Science parking lot and area around all three sides of building. 7. Salt or ice melt on areas 1 – 6 above. All Walks 1. Clear 8’ path along main driveway from Pleasant Street to Flanders Street – including main entrance. 2. Clear north entrance and approach walk from main walk including walk and stairs along east side of building to both faculty parking areas. 3. Clear bus loading sidewalk located on northeast side of center island. 4. Clear walkway, stairs, sidewalk adjacent to Technical Education and old and new Vocational Agriculture areas. 5. Special care must be taken when clearing the main school entrance (the front Promenade). This area has heating elements in front of the three main doorways. For this reason, a snow blower or skid loader is to be used. Skid loader (or like vehicle), is not to exceed an operating weight of 4,500 pounds. Be aware that any damage to the promenade must be repaired at vendor’s expense. Snow must NOT be piled up on or adjacent to the promenade. Any snow left on or near the promenade creates a constant melting and re-freezing issue, therefore all snow must be removed from this area.
