1.1 Furnish and install one 4-module steel deck motor truck scale without bump rails. Load cells, indicator and printer will “not” be needed. 1.2 The scale shall have a clear and unobstructed weighing surface of not less than 70 feet long and 11 feet wide. 1.3 The scale shall be fully electronic in design and shall not incorporate any mechanical weighing elements, check rods, or check stays. 1.4 The scale shall be designed to perform as a single weighing platform and shall be of flat-top design. Side rails are not acceptable. 1.5 The scale shall have a gross weighing capacity of 100 tons. 1.6 The scale shall be designed to accept vehicles that generate up to 55,000 pounds per tandem axle, and a Concentrated Load Capacity (CLC) rating of 60,000 pounds. 1.7 The scale shall be designed to accept an average daily traffic volume of up to 100 vehicles per day, 365 days per year, for 20 years. 1.8 The scale shall be calibrated to 200,000 pounds by 20-pound increments
