Check hour meter operation and record hour meter reading Check condition of ignition system Check and record anti-freeze protection, condition and coolant level (add up to 1 gallon) Check engine water jacket heater Change engine lube oil and filter. Waste oil and filters will be removed from the site included in cost. Check fuel and water separator if equipped on (diesel units only) Check condition of hoses Inspect distributor, battery charging generator/alternator, starter & governor Check and record battery condition and add distilled water if required Check and clean battery terminals Check and record complete charging system Check and record exhaust system condition Check condition of water pump Check condition of hoses and connections Check condition of fuel lines Wipe generator clean Conduct safety shutdown check Run generator to check and record voltage and frequency; check instrumentation and adjust as required. Check exerciser clock Check and record actual cold cranking amps @ 0 deg. F On diesel engines with cylinder liners – check coolant additive levels (DCA) Change fuel filers (Diesel units only) Inspect, clean spark plugs, replace if needed (if applicable) Inspect and adjust ignition system (not applicable if diesel) Check air filter, change if needed.
