Specifications include, but are not limited to: 1. Provide and install one (1) Whelen Liberty II series light bar model as follows: Model BB2DEDE – 54” Liberty II WeCanX, red driver side, blue passenger side, photocell Three (3) IBDLD – Front facing red/white inboard warning light modules Three (3) IBDLE – Front facing blue/white inboard warning light modules One (1) IBDSD – Front facing center mounted red/white short inboard warning light One (1) IBDSE – Front facing center mounted blue/white short inboard warning light Three (3) IBDLK – Rear facing red/amber inboard warning light modules Three (3) IBDLM – Front facing blue/amber inboard warning light modules One (1) IBDSK – Rear facing center mounted red/amber short inboard warning light One (1) IBDSM – Rear facing center mounted blue/amber short inboard warning light One (1) IA3 – 3-LED Alley Lights One (1) CLBV2V – Integrated Vehicle-to-Vehicle Synchronization module One (1) MBEZ105 – Lightbar Mounting kit Ford Interceptor Utility, black straps 2. Provide and Install one (1) Whelen 100 Watt siren speaker model SA315P 3. Provide and Install one (1) Whelen SAK66P siren speaker bracket for Ford PIU 4. Provide and Install one (1) Whelen CenCom Core Control System as follows: One (1) Model C399 – CenCom Core Light/Siren Control Unit One (1) Model CCTL6 – Full function control head with slide switch and rotary knob siren control One (1) Model C399K4 – Canport Cable Kit for Ford PIU Vehicle Signals One (1) Model CEM16 – 16 Output/4 Input expansion module One (1) Model CHOWLER – Core Low-Frequency Siren system with HWLRB29 mounting brackets 5. Provide and Install two (2) Whelen I2D/E Duo ION Series LED Warning lights in the grill; Red/white driver's side and blue/white passenger side. 6. Provide and Install two (2) Whelen VTX609C into the front OEM headlamp warning light location. 7. Provide and Install two (2) Whelen V23*TPB onto the front fenders using V23P20B 20° angled black housings. Red driver's side and blue passenger side. 8. Provide and Install two (2) Whelen WION* within the rear side cargo windows using IONK1B mounting brackets. Red driver's side and blue passenger side. 9. Provide and Install four (4) Whelen VTX609* into the factory rear taillight housings. One red on each side, and one white on each side. 10. Provide and Install two (2) Whelen TLI2D/E Duo T-Series ION LED Warning lights on the rear-facing horizontal plastic fascia; Red/white driver side and blue/white passenger side. 11. Provide and Install two (2) Whelen TLMIR/B Mini T-Series LED Warning lights downward facing next to the license plate illumination lights; Red driver's side and blue passenger side for rear-facing warning lights when rear liftgate is opened. 12. Provide and Install one (1) Whelen model 3SRCCDCR 3” round red/white interior light to be mounted on the interior of the rear cargo hatch to illuminate the rear cargo area and cabinet. 13. Provide and install one (1) Whelen 60CREGCS 6” round red/white interior dome light to the interior headliner between the driver and passenger front seats.
