Specifications include, but are not limited to: RIGHT TO TEST The methods of testing the various grades of oil are clearly stated in ASTM D396 and ASTM D6751. CRPC members shall be permitted to require a sample of the oil at the time of any delivery and may submit such sample to a recognized testing laboratory. If such tests show that the oil does not comply with the specifications below, the vendor agrees to remove the contents of the tank involved and replace these contents with suitable material all at no expense to the CRPC member. Also, if the tests show that the shipment is not in accordance with the specifications, the vendor agrees to pay the costs of the tests, and to compensate the CRPC member for any damages caused by clogging, corrosion, etc. as a result of improper materials use. FUEL OIL SPECIFICATIONS The fuel oil described herein shall be suitable for heating schools and public buildings and shall adhere to the STANDARD SPECIFICATIONS FOR FUEL OILS - ASTM D396 and STANDARD SPECIFICATION FOR BIODIESEL FUEL BLEND STOCK – ASTM D6751. This publication can be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19193. In addition, the fuel shall be free of any undesirable substances in quantities sufficient to cause damage to or improper operation of the burners. BIO HEATING OIL BLENDING It is the sole responsibility of the vendor to ensure the proper blending method and appropriate quantities blended bio product (B5 or B20) conditioned to the appropriate ambient temperature to avoid cold weather starting difficulties of equipment in the winter months. RECYCLED PRODUCT IS NOT ACCEPTABLE. DIESEL SPECIFICATIONS Diesel fuel must be suitable for the proper operation of internal combustion engines. The various characteristics required must conform to all applicable federal and state regulations. The diesel fuel herein specified shall be hydrocarbon oils, free from acid, grit, salt water and fibrous or other foreign matter, and shall conform to the requirements of ASTM D975 of latest revision. WINTERIZATION Certain CRPC members have specified a winter blend of diesel/premium diesel to be delivered either automatically or on an on-call basis. Unless a specific blending formula has been stated, the awarded vendor(s) shall be responsible for ensuring the cold weather, trouble-free operation of equipment/vehicles. The addition of cold-flow additives, in accordance with industry standards, will therefore be required to meet such blending requirements at no additional cost.
