Specifications include, but are not limited to: FUEL OIL SPECIFICATIONS The fuel oil described herein shall be suitable for heating schools and public buildings and shall adhere to the STANDARD SPECIFICATIONS FOR FUEL OILS - ASTM D396 and STANDARD SPECIFICATION FOR BIODIESEL FUEL BLEND STOCK – ASTM D6751. This publication can be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19193. In addition, the fuel shall be free of any undesirable substances in quantities sufficient to cause damage to or improper operation of the burners.; BIO HEATING OIL BLENDING It is the sole responsibility of the vendor to ensure the proper blending method and appropriate quantities blended bio product (B5 or B20) conditioned to the appropriate ambient temperature to avoid cold weather starting difficulties of equipment in the winter months. RECYCLED PRODUCT IS NOT ACCEPTABLE.; DIESEL SPECIFICATIONS Diesel fuel must be suitable for the proper operation of internal combustion engines. The various characteristics required must conform to all applicable federal and state regulations. The diesel fuel herein specified shall be hydrocarbon oils, free from acid, grit, salt water and fibrous or other foreign matter, and shall conform to the requirements of ASTM D975 of latest revision.; BIODIESEL (B100) SPECIFICATIONS The BioDiesel herein specified shall conform to the requirements of ASTM D6751 of latest revision. A certification of analysis must be provided with each shipment. Failure to comply may result in refusal of receipt of product.; BIODIESEL BLENDING It is the sole responsibility of the vendor to ensure the proper blending method and appropriate quantities blended bio product (B5 or B20) conditioned to the appropriate ambient temperature to avoid cold weather starting difficulties of equipment in the winter months. RECYCLED PRODUCT IS NOT ACCEPTABLE.
