Specifications include, but are not limited to: Equipment shall consist of a dump body, plow frame, front mounted hydraulics and, reversible snowplow. Any item not specifically mentioned, but necessary for a complete operating package, shall be included in the vendor’s bid, and vendor shall note in writing any deviations from these specifications. Hydraulics: The City of Danbury salt spreading settings are 300 and 500 pounds of salt per lane mile. The hydraulics fit up vendor must provide a complete system that has the mentioned settings at the center of the hydraulic system bell curve. A door height opening of one inch or lower, to achieve the mentioned settings will be considered to not meet this specification and the hydraulic drive pump must be resized. Proof of calibration at the time of the delivery will be required. PLOW HITCH - Required - Plow hitch shall be custom low mount, tilt-over type; Construction – all structural steel; Cheek plates shall be 5/8” to extend back as far as possible; Multiple push points shall be at a height that has been set in accordance with the plow manufacturers recommendation; Power lift cylinder shall be 4” x 10” double-acting stainless steel tubing; Plow lights shall be low profile LED type on custom aluminum brackets...
