Specifications include, but are not limited to: SPECIFICATIONS FOR SNOW AND ICE CONTROL MOUNTED APPARATUS AND AN ALL-SEASON DUMP BODY CAB TO AXLE DIMENSION: Approximately 96 inches WHEEL BASE: Approximately 171 inches (Please note; the dimensions for C.A. and W.B. are estimates only. The bidder must decide what the correct dimension shall be based on what is the most suitable for the body configuration requirement specified in this section). TYPE: The trucks will have the body installed is a 2003 Sterling model LT-7500. The vehicle is a conventional two-wheel drive unit with a single rear axle, dual rear wheels having a certified gross vehicle weight rating of not less than 36,000 pounds. The truck is equipped with an Allison transmission with the optional PTO output. The hydraulic system shall have the ability to allow for complete operation of the vehicle without engaging the pump. This system shall be capable of operating all functions of the snowplow, dump body and material spreader and any other hydraulic attachments required herein. FASTENERS: All fasteners used on body, hoist, hitch and other allied equipment and related parts shall be grade 5 or better with USS or SAE threads. CHASSIS PREPARATION: The chassis from the cab back shall be, sandblasted, primed, painted and undercoated to protect all the underbody components from corrosion.
