Specifications include, but are not limited to: 1) The signal poles shall meet or exceed Colorado Department of Transportation (CDOT) current S-614-40A requirements. The CDOT S-Standard plans and drawings can be found on the following website. https://www.codot.gov/library/traffic/traffic-standards/2012-s-standard-plans/s-614-40a-alternate-trafficsignal-installation-details/S-614-40A%20-5-page%20set.pdf; 2) Signal poles shall be hot dip galvanized (ASTM A123) and painted Federal Green #14056 (or approved equivalent). Painting shall conform to CDOT Section 522, Duplex Coating System; 3) The luminaire mounting height shall be 30-feet; 4) The luminaire arm length shall be 15-feet; 5) All poles will include base sections, anchor bolts with steel template, and all hardware necessary to make a complete assembly. Painted metal anchor bolt nut covers will be required. Anchor bolts will be delivered a minimum of two (2) weeks prior to delivery of the poles.