B2300064 - Camera Cabling

Copper Cable and Pathway Requirements:    (QTY 283 cables requested)
 

• Modular patch panels itemized in specification section for all cables are required.
• CommScope 7504 Cat 6 Blue Cable
• All terminations must be tested to 250 MHZ and test sheets must be bound and given to technical services for future reference.
• All test documentation shall be delivered in hard and soft copy.   Test documentation will include build out floor plan and cable test results.
• All testing must be done with company owned equipment and Corning certified for fiber.
• Copper cable locations and other requirements will be handed out at the mandatory pre-bid meeting.
• All cable runs will be home run from the distribution frame to each work area.
• Bridge taps and splices are not permitted as part of the horizontal cabling.
• Grounded cabling is not required .90 Meter maximum horizontal cable length.
• Provide neat cable management in the computer room.
• Commscope High Density Modular Patch Panels P/N 1375292 (2U-48) will be utilized for Data Closet Terminations
• Commscope SL110 Series Modular Jack to be utilize in conjunction with the Patch Panel for Data Closet Termination.    All patch panel Jacks must be left populated even if a cable is not terminated.  All ports in all installed patch panels must have a modular jack installed.
• All patch panels and cables must be labelled.
• All cables must be pulled to their final location.  If conduits or cut outs are not supplied, or furniture mounting is required, the completion of the cable pull must be completed as requested.
• Provide support for cabling throughout the facility via J-hooks/Arlington loops or other similar means.
• Assure a ANNSI code and other code requirements are met.
• Assure all pathways are properly sleeved.
• Pathways and/core drills may be required and should be included as part of the requirements of the project.

• Provide appropriate and required equipment for cable bend radius when water falling into the rack.
• Provide fire caulking in all required locations.
• Provide appropriate support.

• The contractor company (not just the individual doing the work) must be Uniprise Certified Installer in the state of Colorado.
• At least one technician working on this project shall be BICSI (Building Industry Consulting Service International) certified.
• Performance bond is required.
• Contractor to have a 1 year labor, materials, and application assurance warranty.  
• Contractor must comply with Commscope’s 25-year labor, materials, and application assurance warranty.    The contractor bonds are not associated with this 25-year Commscope warranty.
• The contractor company is required to be within 3-hour travel distance from 1401 N. 17th Ave, Greeley, CO 80631
• All staff or agents of the contractor must be full time employees.   Contractors utilizing independent contractors, temporary employment or sub-contracting the work will not be permitted.
• Project must have a full-time employee of the award company to perform project management duties.
• The Contractor must have an office within 90 miles of Greeley, Colorado.
• All individuals must be able to pass a background check if required to access restricted areas such as the jail.

• All work shall be done in a workman like fashion of the highest standards in the telecommunications industry.
• Corning Cable Systems SRP’s (Standard Recommended Procedures) must be followed to ensure that materials are installed in a neat and secure manner.
• Workers must clean any debris and trash at the close of each workday.
• Vendor will replace or repair all materials, furnishing, and coverings that may become damage as a result of activities.
• Any parts, components, subassemblies, or materials not specified, but necessary for a complete and functioning system must be furnished as part of the finished product.  No additional allowances will be made for items omitted from the specifications.
• All personnel working on site shall be visibly identifiable at all times as a representative of the vendor by clothing and photographed identification badges.

• Projects Specifications including building footage and a cabling and data closet visual walkthrough will be reviewed at the mandatory pre-bid.   The Contractor is required and responsible for all measurements of all cables and other materials.   The walk-through will provide guidelines.
• All installation activities to include cabling can be completed during normal business hours.  Normal business hours are Monday through Friday from 7 AM until 5:00 PM.

• Part number UNJ 600 GY

• Part number M10L-262
• Part number M12L-262
• Part number M14L-262
• Cubicle Furniture Faceplates
• Blank Faceplates
• Security hardware (IE; Screws, etc)

• 13 Commscope High Density Modular Patch Panels P/N 1375292 (2U-48) will be utilized for Data Closet Terminations
• Commscope SL110 Series Modular Jack to be utilize in conjunction with the Patch Panel for Data Closet Termination.
• P/N 1375292 (2U-48)

• 200 (1) foot UNC6-GR-1F (Green)
• 150 (3) foot UNC6-GR-3F (Green)
• 150 (5) foot UNC6-GR-5F (Green)
• 50 (25) foot UNC6-GR-25F (Green)
• 50 (50) foot UNC6-GR-50F (Green)

• Cables to be labeled on both ends per the specified Weld County standard.  This will be provided after the bid award.

• None requested

• 150  -  Part number UNJ 600 BLK