Specifications include, but are not limited to: one Arctic Compressor Brand 4 Stage Compressor and one Arctic Compressor Brand Class II Containment Fill Station. Model E4-10-A6 4 Stage Arctic Compressor; Single Phase Electric Motor; With Real Time Electronic CO Monitor; i. Made in the USA; ii. Maximum working pressure no less than PSI rating of 6000; iii. Minimum charge rate of 14 CFM; iv. 4 high performance ball or roller bearing reciprocating stages; v. 10 horsepower (HP); vi. 1400 RPM; vii. 700 lbs. viii. Power transmission from motor to compressor type: V-belt drive; ix. Filter system and safety devices installed. x. Enclosed frame compressor in sound suppressing cabinet that reduces noise to less than 78 decibels at 3 feet. Model C-FS2C55 Class II Containment Fill Stations with Control Panel; i. Made in the USA; ii. Maximum input pressure of 6000 PSI pneumatic; iii. 4 UN cylinder storage cascade system with double fill station including control panel and gauges; iv. Fill station shall meet and exceed the standards and equipment requirements set forth by NFPA 1901; v. Fill station shall be testing and certified to at least 5700 PSI burst pressure by an independent third party; vi. Venting shall be provided to allow air from a cylinder rupture to escape the fill station and be directed away from the fill station operator; vii. Fill station shall be constructed of steel; viii. Full enclosure fill pockets shall be constructed of steel; ix. Quantity two (2) each: fill pockets, fill hoses within the fill station and hose adapters for quick connect cylinders; x. Threaded hose connection type
