Specifications include, but are not limited to: NOZZLE SHUTOFF Ball valve shutoff shall be corrosion resistance, the valve body shall be constructed from hardcoat anodized aluminum extruded alloy and include a quick change rear valve seat and stainless steel shut off ball. The waterway shall have a 1-3/8" diameter unobstructed path and comply with the current NFPA 1964 Standard. The couplings shall be configured as a 2-1/2" female NH rocker lug swivel inlet with the ability to continuously swivel when tightened and a 2-1/2" male NH outlet and be suitable for use with smooth bore tip, stack tip, or combination fog/straight stream nozzles or used for break-and-extend operations. The ball valve shall accept the optional Tips; smooth bore insert kit. The unit shall be covered by a five-year warranty. Straight Tip 1.25 X 2.5 NH Thread Inlet Coupling Size A will be 2.5 in female thread and coupling size B will be 1.5 in male thread. Coupling Style shall be rocker. SELECTABLE GALLONAGE NOZZLE Selectable gallonage nozzle with shutoff shall be provided. The nozzle design shall allow for straight stream through wide fog patterns with user selectable flows and be able to be flushed without shutting down. For corrosion resistance and durability the nozzle shall be constructed from hardcoat anodized aluminum alloy, have a stainless steel ball valve with quick change polymer valve seat, a protective rubber bumper, stainless steel spinning fog teeth, laser engraved serial number, reflective labeling and five year warranty. The nozzle shall comply with the current NFPA 1964 standard. The nozzle shall have six (6) selectable flow settings @ 100 PSI: 30 GPM 60 GPM 95 GPM 125 GPM 150 GPM 200 GPM The nozzle shall have a 1-1/2" female NH swivel rocker lug inlet, which allows the nozzle to swivel when tightened and be designed to accept the FoamJet multi expansion foam attachment if required.