Specifications include, but are not limited to: VEHICLE - TRUCK, WELDING UTILITY WITH ACCSSORIES, APPX GVWR 15,000 LBS, 5-SPEED AUTO. VRP- REPLACEMENT: VEHICLE REPLACEMENT PLAN/TURN-IN VEHICLE # 33864. The equipment shall conform in all respects to the Division of Industrial Safety Orders Cal/OSHA and California South Coast Air Quality Management District (SCAQMD). Plus any other pertinent regulations. Bidder may be required to furnish proof of compliance. This equipment shall meet or exceed noise emission limits applicable to Federal and Cal / OSHA requirements for operators on (8) hours operation without hearing protection. All separate units shall be installed and connected for operation. Only new, current production models will be considered. Bidder shall furnish complete information on the equipment to be furnished. Information must include published literature indicating all standard and optional features. BODY STYLE: Current model year (NEW and UNREGISTERED) Conventional, regular cab, two-wheel drive CAB: The cab shall be a conventional cab equipped with a heavy duty, vinyl covered split bench seat, equipped with occupant restraints and configured to accommodate 3 adults. Interior color shall be black or dark grey Two inside sun visors, two armrests and two (2) universal cup holders. Full floor coverage, black rubber mats with additional removable floor mats. Factory installed A/C. Extended side mirrors to clearly see around bed. Cab steps (running boards), open, dirt shedding tread grip style, with traction lugs for safe cab entry from both the driver and passenger side. CHASSIS: GVWR 15,000 minimum 18,000 maximum Vendor to bid WB & CA compatible with specified welding body. Chassis shall have two (2) front mounted tow hooks and a front bumper. ENGINE: Reference: 8 or 10 Cylinder gasoline Displacement of not less than 6.0 Liter. Horsepower not less than 350 @ 5,100 RPM. Horsepower Bid: Gross torque not less than 450 ft/lbs.@ 4,000RPM. Engine supplied must have an engine cooler and a high capacity air cleaner. Engine supplied shall be CARB certified as being ULEV compliant with all applicable state of California and Federal regulations. COOLING SYSTEM: Cooling: Maximum cooling capacity. The largest cooling system offered by the manufacturer, with coolant recovery system. Unit to include heavy duty: engine, oil and transmission coolers. FUEL TANK: Capacity 40 Gallons minimum with two (2) factory installed tanks if necessary. Tanks must fill from same side of truck if two are used. Vendor to supply locking gas cap(s).