Specifications include, but are not limited to: Base Machine: Operating weight shall be a maximum 84,200 lbs. Counterweight a minimum of 16,000 lb. Reach boom 21’-4” with a 12’-10” stick Ground level reach with a 12’–10” stick shall be 38’-6” Maximum cutting height with a 12’-10” stick shall be 35’-2” Digging depth with a 12’–10” stick shall be 26’- 10” Loading height 24’-6” maximum and 6’-2” minimum. Lift capacity at 20’ over the side at ground level shall not be less than 19,800 lb. Lift capacity at 25’ over the side at ground level shall not be less than 14,550 lb. Undercarriage width 11’-3” with 33” track shoes Undercarriage length shall be a minimum 16’–6” Electrical system: 24-volt system, two 1,000 CCA maintenance free batteries 115 amp alternator. Electrical disconnect switch Auxiliary start receptacle for jump starting machine Diagnostic connectors for all major components 35 amp inverter and connection for county’s 800 MHz radio. Safety Avoidance System (programmable): 2D E-Fence system which prevents the excavator from moving past operator defined set points for ceiling height, floor depth and prevents implements from coming in contact with the cab Transmission/power train: Hydrostatic with two travel speeds Automatic travel speed control. Maximum travel speed 2.9 mph Gradeability: 35 degrees/70%.