Specifications include, but are not limited to: TENNIS COURTS•PERIMETER FENCING: oFurnish and install approximately 1680 linear feet of 2” chain link mesh material, 12’ high, on the perimeter (6 sides) around all 10 courts.oInstall new top rail, bottom and middle rail. Provide ALL necessary hardware and brackets. Some existing welded rails will need to be removed on the South perimeter of the courts.oAll existing 12’ perimeter posts will be utilized to support the new fencing material. Bent vertical posts should be straightened as necessary and any broken vertical posts (not able to be bent back into place) should be used as sleeves for new posts. All existing vertical posts to be painted with galvanized metal grade paint per District specifications.Fabricate all posts and rails for ten (10) 8’ x 3’ new pedestrian gates and one (1) 8’ x 10’ service gate.TENNIS WINDSCREEN•Take down existing windscreen and haul away•Install 9’ high tennis grade windscreen on approximately 1250 linear feet of new fencing material. South spectator side does not receive windscreen.•Material: 75% Polypropylene Mesh; Color: Black, equipped with pre-fabricated boxed air vents. Air vents should be 12” by 6”cut outs with no flaps, bound with Polypropylene tape binding. Vents should be placed every 10 feet.