Specifications include, but are not limited to: f furnishing of all material, labor, tools, implements, and equipment necessary to construct the storm drains, drop inlets, and manholes, complete and ready to operate; grinding of existing asphalt concrete pavement, installation of conventional asphalt concrete leveling course, asphalt-rubber aggregate membrane, gap graded asphalt-rubber hot mix, installation of conventional asphalt concrete surface course, pavement striping, slurry seal, remove and replace concrete curb and gutter, traffic striping, utility adjustments and traffic control. There are sections of gutter that do not have a proper drainage slope, consequently, the contractor’s surveyor must survey these areas to provide a positive flow profile so the street can drain by gravity. These survey elevations (plan & profile) must be submitted to the City Engineer for review and approval. (b) Install Inlets $ $ 5 4 EA (b) Install Junction Boxes $ $ 6 1364 LF (b) Install 23” x 14” HE RCP, Class V $ $ 7 192 LF (b) Install 12” RCP $ $ 8 3,080 SF Install Four (4) Dig Outs. Includes Removal and Dispose of Existing Asphalt and Class II Base, as well as Placement of 3-Inch Thick Layer of ½” Hot Mix Asphalt Type A over 9 Inches of Class 2 Base. $ $ 9 2 EA (c) Install New 24’ Wide P.C.C. Driveway Per Detail D3. $ $ 10 1 EA (c) Install New 21’ Wide P.C.C. Driveway Per Detail D3. $ $ 11 1 EA (c) Install New 20’ Wide P.C.C. Driveway Per Detail D3. $ $ 12 1 EA (c) Install New 18’ Wide P.C.C. Driveway Per Detail D3 (e) 3/4” Leveling Course: ½” Hot Mix Asphalt Type A and SS1h Tack Coat $ $ 26 93,200 SF (e) 3/8” Asphalt Rubber Aggregate Membrane (ARAM) $ $ 27 920 TON (e) 1.5” Asphalt Rubber Hot Mix (ARHM) Overlay: ½” Aggregate / Type Gap Graded (GG)