Specifications include, but are not limited to: • Remove existing sinks and replace with Corian (Or Equivalent) one piece counter top with sink and back and side splash • Includes “Paladin Medical”: dispenser hanger with attachments: 2Ft. evolution equipment rail, anti-microbial finish (patent pending), pre-drilled, including end caps and laminate inlay. (Model: IC-112 OR EQUIVALENT) • Remove and replace plumbing as needed to complete project • Silicone all exposed edges Description of responsibilities for the installation of Corian (Or Equivalent) counter tops in various area at LAC USC: 1) Field measure each area for an accurate, no seam, fit. Every countertop size is different. Sink bowl is to be molded into Corian (Or Equivalent) sink at exact location of original sink. Depending on location, most splashes will be no less than 25" high, integral, no seam splash. The Corian (Or Equivalent) countertop/sink is to be a one piece, no seams which includes the sink, splash, drip edge and skirt. All edges will have no more than 3/16” gap between wall and Corian (Or Equivalent). Most countertop/sinks range in sizes from 25" x 70". Removal and installation: 1) Remove existing countertop/sink, faucets, nozzles and all necessary plumbing, above and below. 2) Remove all paper towels, soap and sanitize dispensers. Also, remove anything else that will impede the installation of the new countertop/sink. 3) Make safe and remove any electrical outlet switch as necessary.