Specifications include, but are not limited to: In general, the work shall include but is not limited to modernization of the first and second stories of Salinas Fire Station 1, including Base Bid • Bunk Room and Restroom configuration: Construction includes new walls, doors, flooring, and ceilings as well as casework and other interior finishes as indicated on the plans. Additionally, construction Includes new mechanical, electrical, plumbing, and low voltage systems as indicated on the plans. • Construction of partition walls in the existing apparatus bay to provide landing safety for fire poles and associated electrical and mechanical work. • Structural retrofit: Level 1 Structural Alteration including the installation of new structural ties between the existing block wall and floor diaphragm. Construction also includes the demolition and patching of existing interior finishes and building systems to accommodate this installation. • Electrical and low voltage data communication systems: Construction of and reconnection of existing and proposed electrical power, light fixtures, emergency lights, generator, and data communications systems. • Installationof owner provided generator with fuel base tank, sound enclosure, and automatic transfer switch (ATS). o By Owner: 80kW generator, base fuel tank, ATS, and cover o By Contractor: Installation of generator on concrete pad, site work as indicated on the plans and associated electrical work for full and complete installation. • Full coverage fire alarm system - deferred approval o Complete Fire Alarm system as indicated on the plans. • Fire Station Alerting System. o By Owner’s Vendor: Fire Alerting system devices o By Contractor: Complete required backbone for new Fire Alerting devices to be installed by owners vendor, including conduit, backboxes, blocking where required, etc. • Installation of new mechanical units to supply heating and cooling to the entirety of the second story including modification to existing duct work, new roof mounted condensing units, and required modifications to existing roofing to support new work.
