Specifications include, but are not limited to: This bid specification establishes the requirements for car seats, bike helmets, and life vests that will be distributed to low income families throughout the State. TECHNICAL REQUIREMENTS 3.1. CONVERTIBLE CAR SEAT 3.1.1. Meets FMVSS 213. 3.1.2. Minimum child weight requirement of 5 pounds for rear-facing direction use. 3.1.3. Upper weight limit for the rear-facing direction shall be at least 40 pounds. 3.1.4. Maximum weight supported in the forward-facing direction shall be at least 65 pounds. 3.1.5. Equipped with 5-point harness with a 2-piece chest clip and crotch buckle. 3.1.6. Up-front harness adjustment of five-point harness. 3.1.7. Minimum of 6 shoulder harness adjustment positions. 3.1.8. LATCH equipped and tether included. 3.1.9. Removable head and body pillow. 3.2. HIGH BACK BOOSTER SEAT 3.2.1. Meets FMVSS 213. 3.2.2. Converts to a backless booster seat. 3.2.3. High back booster seat shall support children weighing 30 – 110 pounds. 3.2.4. High back booster seat shall support children 40 – 57 inches in height. 3.2.5. High back booster seat shall have at least 6 positions for height adjustment. 3.2.6. Backless booster seat shall support children weighing 40 – 110 pounds. 3.2.7. Backless booster seat shall support children 40 – 57 inches in height. 3.3. MULTI-SPORT HELMETS 3.3.1. Certified to ASTM F1492 and CPSC Bicycle Helmet Standards. 3.3.2. Gender neutral color such as black, grey, or white. 3.3.3. Shall not be red or blue. 3.3.4. Assorted helmet sizes (small, medium, and large) for youths and adults. 3.4. LIFE VEST 3.4.1. United States Coast Guard approved, Type III Life Vest for General Boating. 3.4.2. Meets the following for sizing and weight: a. Child Size – Fits those weighing 30 – 50 pounds. b. Youth Size – Fits those weighing 50 – 90 pounds. c. Adult Size – Fits those weighing ≥ 90 pounds.