Specifications include, but are not limited to: Material Specifications Rubberized Emulsion shall consist of a stand-alone product (RPME). Materials shall conform to the following: Rubberized Polymer Modified Emulsion RPME shall contain emulsified asphalt, crumb rubber, and polymer modifiers. Polymer Modifier Polymer modifier shall be latex which is added at a minimum of two percent by weight of the RPME. Crumb Rubber The material shall be granulated scrap tire rubber free from fabric wires and other contaminants. Rubber shall be dry and free flowing. Crumb rubber shall have a specific gravity between 1.15 and 1.20. 100% of the rubberized material shall pass a 1.18mm (#16) sieve, 95% shall pass a 0.90mm (#20) sieve, and a maximum of 1% shall pass a 75µm (#200) sieve. The RPME shall contain between 0.55 lbs/gal. and 0.65 lbs/gal. of crumb rubber.