Specifications include, but are not limited to: STANDARD UNIT: - 225 square feet of material sorting surface - 45' long x 60" wide rubber belt picking surface - Belt has molded rubber flutes built into it, which are 1/2" high and 50" wide - 28' long x 60" wide attached infeed change conveyor with collection hopper - Charging belt and picking belt surface are sealed to prevent leakage - Variable speed (0-250 feet/minute) conveyor belt operated from worker's platform - 5:1 gear reduction drive on picking conveyor belt - Eight (8) picking stations; four (4) per side to accommodate 2 to 16 workers - Bottom of drop chute height is 9' to ground - Conveyor belt safety shut-off "pull-type" at each station - Two (2) sets of grated steel, non-slip stairs with 36" high handrails - Work platforms with grated steel, non-slip surface and safety handrails - Removable handrails, removable legs, fold-up work platforms and charge conveyor for Transportation OPTIONAL EQUIPMENT: - Wire Mesh Safety Canopy constructed of #9 flat expanded metal - Inclement weather vinyl canopy with four (4) clear windows per side - Magnetized End Pulley with material chute for picking station conveyor belt - Independent Load Hopper - 20' long x 55" wide drag chain, with 48" high sides. Approximate capacity: 15 yards. Variable speed hydraulic drive. Hydraulically operated metering gate controlled at picking platform control panel - 18" x 60" Flat magnet - Diesel Powered Pump Stand Extended 3 years/3,000 hours whichever comes first on the machine excluding the engine - Platinum Plus Extended 5 years/6/000 hours Caterpillar C2.2 49hp tier 4i - Special Color Paint City to provide paint code and paint chip sample