Specifications include, but are not limited to: Roof Replacement: Demo existing roofing materials down to plywood sheeting Replace any damaged plywood sheets with new Repair Rafter tails as needed. Install new plywood sheeting where needed Install new 30# felt paper Install new Single Lock Standing Seam Metal Roof System including all necessary items: break metal, clips, hardware, roof jacks, coping, and edging. Exhibit Detail will be provided Minimum Metal Roof System or approved equal by City: Type: SS-100 Single Lock Standing Seam Panel System Width: 18” Length: Contractor to field verify before ordering Gauge: 24 Material: Galvalume Color: Bronze/Brown Warranty: Min. 20 Years BEAM, RAFTER, FACIA BOARD REPAIR SPECIFICATIONS Ridge and Rafter Wood Beam Tail Repair: Patch areas if necessary with exterior rated wood epoxy resin Properly prep surface and paint: STORAGE DOOR FRAME REPAIR AND DOOR REPLACEMENT SPECIFICATIONS Properly repair door frame rust with metal patch Remove existing doors and hinges and replace with new metal exterior doors and hinges and install onto existing door frame: Minimum New Door Specifications or approved equal by City: Heavy Duty Steel Door for Commercial, Industrial, and Institutional applications Brand: Commercial Door Metal Systems Level: Heavy Duty, 14 Gauge Steel Door Thickness: 1 ¾” Standard Door Finish: Factory Applied, Baked-On, Rust Inhibiting Gray Primer Core: Rigid Honeycomb or Polystyrene Channels: Inverted top and bottom channels Seams: Interlocking seams Heavy Gauge hinge reinforcements and door closer reinforcement Heavy Duty Hinges Meets of exceeds ANSI A250.6 and A250.6 Minimum New Hardware Specifications or approved equal by City: Pull Plate with Deadbolt Hole (@16” Length) Latch Protector (@7” Height) Surface Bolt (@8” Length) Heavy Duty Grade 1 Single Cylinder Deadbolt Lock with ADA compliant thumb turn Keyed to City Master Key Full Lip Strike Plate Properly prep surface and paint frame and door: Sand, 1 coat of primer, 2 coats of paint
