Removal of Existing HVAC System, Ducts, Curbs, Conduits and Replace with New 1.01 Remove existing HVAC units, pads, ducts, curbs, and bracing as noted on plans MP2.0, MP2.1 and A-113. 1.02 Remove existing exhaust fan and curb as shown on Mechanical Drawings Sheets MP2.0, MP2.1 1.03 Remove existing flue. as shown on Mechanical Drawings Sheets MP2.0, MP2.1 1.04 Remove existing vent. as shown on Mechanical Drawings Sheets MP2.0, MP2.1 1.05 Remove existing electrical equipment as shown on Mechanical Drawings Sheets MP2.0, MP2.1 1.06 Remove existing gas lines as shown on Mechanical Drawings Sheets MP2.0, MP2.1 1.07 Remove existing platform, seal penetration, and patch roof as required. 1.08 Remove and re-install existing plywood (undamaged) sheathing as required to access frame and soffit space for installation of new piping and conduit. 2.00 Installation of New Curbs as shown on plan MP3.0, MP3.1, MP3.2, MP 4.0, MP4.1, MP4.2 and MP5.0 2.01 Install new wood curbs at roof for new condensing unit, new HVAC unit and new exhaust fan locations...
