Specifications include, but are not limited to: • Construction Work as indicated on the plan sheets and these Specifications.• Providing and setting up traffic control measures, including traffic message boards and providing flaggers or other traffic control devices for pedestrians, vehicular and bicycle safety.• Removing and disposing of existing vehicle displays and associated mounting brackets, hardware, visors, backplates, terminal blocks and all associated appurtenances.• Providing and installing new conductors from terminal blocks to the pedestrian displays. Reconnect new conductors to existing system at the terminal block. • Provide and install new pedestrian countdown displays with new 16” housing and new mounting brackets. All pedestrian countdown displays shall be LED. All mounting brackets shall contain signal framework, terminal compartments, adaptors, mounts, pipe fittings, framework parts, pipes, framework bolts and hardware, etc. and other necessary components and parts for a complete installation and functional system. New mounting brackets will need to be modified to provide a fully functional system and be acceptable to the City.• Contractor to make all final wiring, hardware disconnections and connections, and provide necessary machinery, vehicles, and manpower to perform work.• Contractor to field verify all existing equipment to determine exact quantities of new pedestrian countdown displays to be installed and to determine configuration of signal displays is left of door or right of door (LOD or ROD), prior to ordering equipment.