Specifications include, but are not limited to: Remove and dispose of, or recycle, all carpet, vinyl flooring, and cove base in All rooms except where indicated. The contractor is responsible for disposal. Furnish and install Tandus Centiva Powerbond RS cushion in classrooms. The chosen style is Color Spectrum #03343 and the color is Energy #48005 Furnish and install Tandus Powerbond Abrasive Action II (02578) walk-off areas At all doorways and sink locations. The chosen style and color is Charcoal #19100. Follow all manufacturers Powerbond cushion installation and floor preparation instructions. All patched, porous, gritty, or dusty surfaces are to be clean and fully primed with C-56E primer and use CA-WELD on all seams following the manufacturer’s instructions. Sheet Vinyl: Armstrong Connection Corlon with heat welded seams VCT: Armstrong Imperial Excelon with Diamond 10 technology, 12”x 12” tile Furnish and install Roppe 4” rubber cove base #139 Deep Navy, or equal , around the perimeter of each room. Must use manufacturers recommended cove base adhesive. District will remove/replace furniture.