Specifications include, but are not limited to: A. Install Vinyl Composition Tile flooring provided by CALPIA per Exhibit 1 – Napa State Hospital Flooring Contract Plans for the main areas (excluding bathrooms) for modular buildings 7 & 8. i. Line off entire area to be installed; ii. Apply the adhesive over the area not covering the chalk lines and using the fine notching of the S-891 Trowel. You may prefer to spread and install one quarter of the room at a time; iii. Allow the adhesive to set until dry-to-touch (except S-240) following the recommended open time. To test, press your thumb lightly on the surface of the adhesive in several places. If the surface feels slightly tacky as your thumb is drawn away and does not stick to your thumb, the adhesive is ready for the installation; iv. Install the tile along the chalk lines, laying the field area first and then fitting in the border tile.