Specifications include, but are not limited to: 1. Inspect existing fume hoods to verify existing conditions; 2. Engineer new fire suppression systems incorporating Novec 1230, or County approved extinguishant, only; 3. Transmit equipment submittals to County Project Manager for review and concurrence; 4. Submit design to Santa Clara County Planning Department/Fire Marshal for plan check review; 5. Obtain necessary permit from the Santa Clara County Planning/Fire Marshal’s Office; 6. Procure all required tools, equipment and materials; 7. Remove and legally dispose of two (2) existing fire suppression systems; 8. Install two (2) new fire suppression systems, one (1) in each fume hood. POST-INSTALLATION: 1. Test and confirm operational status of all components; 2. Call for final inspection by Santa Clara County FAF Inspector and Fire Marshal. Close permit and submit to County Project Manager; 3. Submit as-built drawings to County Project Manager, soft and hard copy; 4. Instruct County staff on proper maintenance and operations of new equipment; 5. Clean jobsite, removing and legally discarding all materials.