Specifications include, but are not limited to: A. Lube all points of friction, including but not limited to, rollers, bearings, gears and guides. B. Ensure the doors are balanced, the motor limiters are properly adjusted, the drive chains are tight and the manual system is in proper working order. C. Inspect and test all door functions, including but not limited to, the electrical wiring and connections, chain, chain shafts, gears and bearings. D. Quarterly maintenance supplies shall include, but not limited to, belts, cleaning chemicals, oil, grease, cleaning rags, switches and fuses. E. Inspect all electrical parts and wiring including touch pad controls and ground loops. This includes radio receivers. Any work requiring a C-7 or C-10 license will not be covered under this contract. F. Pressure wash all inspected bay doors. G. Replacement parts to any of the above. H. All maintenance performed shall be to insure compliance with minimum manufacturer’s operating specifications for the model and make of this equipment.