Specifications include, but are not limited to: The work necessary for the completion of this contract consists of, but is not limited to: (1) distributing construction notices to affected residents and businesses; (2) placing “Temporary Tow-Away No Parking” signs and setting up traffic control; (3) construction surveying, staking, and monument preservation; (4) implementing BMPs in work areas; (5) cold milling and overlaying existing pavement; (6) removing existing asphalt and constructing full depth asphalt concrete digouts; (7) removing existing curb and gutter, sidewalk, curb access ramps, commercial driveway approaches, and cross gutters; (8) constructing curb and gutter, sidewalk, curb access ramps, commercial driveway approaches, full-depth AC slot patches, and cross gutters; (9) installing traffic striping, signing, sign posts, and pavement markings; (10) coordinating with outside utility owners to have their facilities adjusted to grade; (11) removing existing hardscaping and pavement as needed for contract work; (12) removing and relocating existing street lights; (13) installing signal loop detectors; (14) adjusting manholes, valve boxes, and pullboxes to grade; (15) removing and relocating bollards; (16) removing existing and installing new cleanout and water valve boxes to grade; (17) installing new traffic poles with foundation; (16) installing conduits; (18) installing new City-furnished poles on the new foundation with LED signs and APS pedestrian push button assembly; (19) removing existing median pole/flashing beacons and its foundation and installing new City light standard pole; (20) installing pole mounted cabinets with sign controllers; (21) removing, relocating, and installing new pull boxes; (22) installing conductors/cables in conduit; (23) installing conduits into existing pull boxes; and (24) other incidentals items to be completed in work places required by the Plans and Specifications.
