Specifications include, but are not limited to: The pattern mill shall be designed as an
attachment machine for host machines, such as
skid steer loaders, front end loaders and motor
grades. The unit shall provide the necessary
hydraulic and operational controls.
The unit shall have a center pivot design that will
prevent instability and bouncing by focusing the
weight of the skid steer onto the cutting drum and
releasing the stress on the planer frame.
Front Down Design: The unit shall keep the front
of the planer low to the ground, providing a barrier
for the debris generated.
The unit shall be equipped with an access door for
inspection and removal of pics.
The unit shall have a minimum of 80number of pic
The pattern mill unit shall have a hydraulic pattern
control. The cutting wheel shall be controlled
hydraulically, eliminating the cam wheel arrangements.
The unit shall have an interchangeable hydraulic
actuator plate and sprockets. The interchangeable
sprockets in conjunction with the interchangeable
pattern plates shall allow the distance between the
pattern cuts to be varied. The pattern mill shall be
designed with interchangeable hydraulic actuator
plates so that the length and depth of the cut can
be varied for multiple applications.
The unit shall have a front metering wheel that
tracks the distance traveled indicating the pattern
mill when to engage.
The pattern mill unit shall have an optional
electronic interruptible cut (IC) control module.
The IC module shall allow a custom pattern code
available for storage on a SD card. The
interruptible cut (IC) module shall have the
capability to cut lines with various complex
patterns in accordance with California State