Specifications include, but are not limited to: BODY STYLE: Current model year (NEW and UNREGISTERED) Conventional cab, two-wheel drive with single rear wheel (SRW) CAB: The cab shall be a regular cab equipped with a heavy duty, vinyl covered split bench seat, equipped with occupant restraints and configured to accommodate 3 adults. Interior color shall be black or dark grey. Two inside sun visors, two armrest and two (2) universal cup holders. Full floor coverage, black rubber mat with additional removable floor mats for driver and passenger. Instrumentation to include speedometer, oil pressure, volt meter, temperature, fuel gages. Factory installed A/C and extendable side mirrors. Cab steps (running boards), open, dirt shedding tread grip style, with traction lugs for safe cab entry from both the driver and passenger side. CHASSIS: GVWR (estimated) 10,500 single rear wheel. Wheelbase estimated to be (WB) 160 – 180 inches. Payload not less than 4,800 pounds estimated. CA 56 to 60 inches (est). Vendor to bid the proper CA to support the 8’ x 40” utility body without overloading either axle. ENGINE: Reference: GASOLINE 8 or 10 cylinder Displacement of not less than 5.5 Liter. Horsepower not less than 350 @ 5,200 RPM. Gross torque not less than 350 ft/lbs. @ 4,000RPM. Engine supplied must have an engine cooler and a high capacity air cleaner. Engine supplied shall be CARB certified as being ULEV compliant with all applicable state of California and Federal regulations. COOLING SYSTEM: Cooling: Maximum cooling capacity. The largest cooling system offered by the manufacturer, with coolant recovery system. Unit to include heavy duty: engine, oil and transmission coolers.