Specifications include, but are not limited to: To purchase one (1) ea. Truck, Regular Cab, Dump, 19,000-pound GVWR, GASOLINE powered, Automatic Transmission, factory 4X4, with transfer case. Installed 2-3 cubic yard, low mount, dump body. A two-way tailgate. A retractable load tarp system. A Cross Frame through toolbox with doors at each end, located between the cab and the dump body. Unit is to be equipped with a "snow" Plow installation, including push frame lift ram, swing rams, mold board and hydraulic controls; Side frame mounted toolbox. Trailer Hitch with factory trailer towing package. Units to be fully compliant with SCAQMD Rule 1196. The chassis is to be an OEM (factory) 4X4 with 2 speed transfer case. The ratios for both the front and rear axles are to be 4:88: 1. This unit is to have a factory installed "ROCKPLOW PREPARATION PACKAGE” or Department approved equal. This unit is to have a factory installed "HIGH-CAPACITY TRAILER TOW PREPARATION PACKAGE” or Department approved equal. Unit offered is to be a long wheelbase model with the highest factory available GVWR rating. GVW Rating of 19,000 lbs. minimum. Regarding Wheelbase and Cab to axle Dimensions: The final determination of the Wheelbase and cab to axle dimensions must be presented, by the awarded vendor, to the Department at a pre-build meeting prior to the chassis order. The Bidder must present options and obtain Department approval for the proposed dimensions, weight distribution calculations and final configuration.
