Specifications include, but are not limited to: • Demo existing playground equipment and dispose in a legal manner. • Demo existing poured in place rubber system and dispose in a legal manner. • Demo existing footings and compact soil to 95% compaction where existing footings were present. • The sub-base should be compacted using a vibrating tamper, to approximately 95% proctor density. • Paint existing swing set to match new playground equipment posts. • Install new PlayMax Play Turf over rubber system with minimum 84” critical fall height as recommended by Playground Equipment Manufacturer. • Installation should be in accordance with ASTM F1292 for Impact Attenuation of surface system under and around playground equipment. • The Play Turf installer should be a certified PlayMax Surface System contractor. • Install new owner furnished playground equipment as illustrated in the bid documents. • The Contractor must completely familiarize themselves with the equipment specifications, plans, and equipment lists which is part of this document. The material, products and equipment described in the bidding documents and shown on the drawings establish a standard of required materials, required play activities, dimensions, appearance, durability, quality and warranty. • The Contractor shall install owner furnished playground equipment in accordance with the project drawings/specifications and project manual.