Mobilization of Equipment and Material, Permits, Insurance, Bonds, Taxes, Portable Restroom Facilities, Freight, Submittal Documents, potable drinking water, safety requirements, meetings, utility identification and project signs, complete in its entirety in strict conformance with the contract documents. Furnish all labor, material, transportation, equipment and services for the placement of Crack Sealant in the cracks along the street sections listed and illustrated on the Improvement Plans. Include notification of Residents, Businesses, Schools, Government Agencies and Institutions at least 24 hours prior to crack sealing a given street section. The notification requirement is incidental to this item. Include the initial sweeping of the streets prior to crack sealing as an incidental item. Also, include the sweeping of the street area after crack sealing has been accomplished each work day as an Traffic Control is included as incidental to this item. The placement of crack sealant shall be accomplished in strict conformance with the contract documents. incidental item. Furnish all labor, material, transportation, equipment and services for the placement of a Type II slurry seal coat on the existing A.C. pavement surface along the street sections illustrated and listed on the Improvement Plans. Street sweeping, clean up, protection of utility covers and traffic control are incidental and to be included within this item. Notification of Residents, Businesses, Schools, Government Agencies, Post Office, Agencies and Institutions at least 24 hours prior to slurry seal coat application is incidental to this item. The slurry seal coat shall be compensated by this item per dry ton of aggregate utilized. The calculated weight of the dry aggregate to be placed per square yard was based upon 14.0 pounds per square yard as illustrated on the plans. The dry ton aggregate price shall include the incidental items noted by this item and the Specification requirements. It shall also include the remaining constituents in addition to the dry aggregate for the formulation of a modified slurry asphalt emulsion including but not limited to set control additives, coloring additives, styrene butadiene latex, water and all other required components.
