Specifications include, but are not limited to: Pool Maintenance Services for City Pools 2.1 SERVICES GENERAL- The basic service obligations of the contractor shall include, but not be limited to, the following: • Vacuum pool • Clean pool tiles, pump strainers, and basket strainers • Brush pool plaster • Clean back-wash filters • Test pool water chemistry (i.e. chlorine, pH, alkalinity, calcium hardness, etc.) • Maintain water levels (i.e. fill and/or drain) • Pool start up • Chemical treatment • Clean pool deck and pump room • Pool equipment inspection • Testing/replacement of pool lamps MINIMUM FREQUENCY SCHEDULE DAILY MAINTENANCE SERVICES • Clean (blow-off/wash down) pool decks • Clean surge pit • Net pool • Check chemical balance and add chemicals as necessary • Calibrate controller and/or chemical pump • Check all gauges • Backwash filters as needed 8. Clean weir baskets and/or gutters • Clean pump strainers • Rinse off pool deck equipment (i.e. lifeguard stands, diving boards, and starting blocks) • Perform minor equipment maintenance (i.e. PVC fittings, chemical feed lines, foot valves, self-priming valves, etc.) • Perform minor pool maintenance (tighten handrails and steps, replace/re- secure cracked or missing tiles, re-secure pool light fixtures to wall) • Complete daily log • Secure facility BI-WEEKLY MAINTENANCE SERVICES (twice per week) • Vacuum pools • Brush pools • Clean pool tile 3 | P a g e • Clean stainless steel around pool deck (i.e. hand rails) • Clean pump room (i.e. spider webs, sweep floors, rinse off equipment, etc.) • Perform pool light inspections to ensure the fixtures are secured properly to the wall and the lights are operational. MONTHLY MAINTENANCE SERVICES • Complete chemical analysis and associated report/log • Clean ORP probes • Clean injectors, monthly or as needed • Change heater air filters (winter months only). Filters to be provided by the City. QUARTERLY MAINTENANCE SERVICES • Grease pumps and motors • Change oil in motors ANNUAL MAINTENANCE SERVICES • Perform heater maintenance per manufacturer’s specifications. • Rebuild all LMI pumps. • Drain and refill pools as needed to maintain proper pool chemistry. • Perform filter media inspection. Make recommendations to inspect, remove, replace and dispose of sand in filter tanks.
