Specifications include, but are not limited to: CHASSIS: 2 axel-4X4 configuration, 41,000 GVWR, 126” maximum CCA, chassis to accommodate a minimum 5 CU.YD. Selfcontained pot hole patch body. Chassis to be painted black Front axle- Meritor forged I-beam, 18,000 GAWR. Power steering Front suspension-18,000 lb. with parabolic leaf springs with heavy duty shocks. Front brakes – air disc. Front tires-315/80R22.5 LR-H Front wheels-1-piece steel, black Rear axle-Meritor single rear drive, 23,000 GAWR Rear suspension-26,000 lb. heavy-duty spring with overloads, heavy-duty shocks. Rear brakes – air disc with combination spring break unit. Rear tires-11R22.5 LR-H, built in tire pressure monitoring system or cat eyes (specify) Rear wheels-1-piece steel, black Drag link and tie rods greased and sealed Drivelines- Meritor MXL Series Front bumper-Full width, stainless clad aluminum with two frame mounted tow hooks, license plate holder, and center step. Rear frame mounted tow hooks Chock blocks-Storage rack with two rubber chock blocks, mounted on drivers’ side Mud flaps-Legal aggregate hauling on road, frame mounted Toolbox-mounted to driver’s side frame rail, maximum size for available frame rail space, lockable with door safety chain. Front of Truck equipped with hydraulics and electrical connections for a front mounted, quick disconnect design, 120" wide minimum 30" tall. Henke 30R10 or equal. Snow plow (vendor provide manufacture, model, weight, and price) Henke 30 R 10 or equal Shall be strength and weight designed appropriate to push loose sand, debris, or packed snow from a roadway
